How Does LVDT Measurement Compare To Other Precision Methods

Quick Summary

LVDT measurement relies on a magnetic coupling with no sliding electrical contact, which could give long service life, fine resolution and tolerance for dirt, shock and temperature swings. Potentiometers, magnetostrictive, optical and capacitive sensors can each win on cost, range or non-contact sensing. Stroke length and operating environment usually decide which one fits.

A machine builder choosing a position sensor often meets the same trade: the sensor that reads most finely is not always the one that survives the shop floor. LVDT measurement sits in a useful middle ground, because it pairs fine resolution with a design that has nothing sliding or rubbing inside.

Here is how it stacks up against four other precision methods, and where each one could make more sense.

How LVDT Measurement Works In Plain Terms

An LVDT, short for linear variable differential transformer, has two parts: a hollow coil assembly that stays fixed and a small magnetic core that attaches to whatever is moving. When an alternating signal energizes the coil, the core’s position changes how that signal is shared between the output windings. The difference between those outputs shows how far the core has moved from center and in which direction.

The core slides inside the coil without touching it. With nothing rubbing, the parts do not wear in the usual way, and resolution is often limited by the signal electronics rather than by the sensor itself.

A signal conditioner then converts the coil output into a voltage or current that a controller can read. Some LVDTs build that electronics into the housing, while others pair with a separate unit.

What To Weigh When Comparing Precision Position Methods

Five questions sort most position sensing decisions:

  • Stroke: how far the moving part travels.
  • Resolution and repeatability: the smallest change the sensor detects, and how consistently it reports the same position.
  • Environment: dirt, oil, moisture, shock, vibration and temperature.
  • Service life: how long before wear or drift calls for replacement.
  • Cost and installation: purchase price, mounting space, electronics and cabling.

No method leads on every line. The sections below set each alternative against these five.

Resistive Potentiometers: Simple And Economical, With Wear To Plan For

A linear potentiometer slides a wiper along a resistive track, and the voltage at the wiper tells position. The design is easy to wire and often costs less than an LVDT, which makes it a sensible choice for basic positioning where long life is not critical.

The tradeoff comes from the sliding contact. Friction could gradually wear the track, which may affect resolution and signal quality over time. In applications with frequent motion, that wear could shorten the useful life compared with a non-contact LVDT.

Magnetostrictive Sensors: Long Strokes In A Different Package

A magnetostrictive sensor sends a short current pulse along a waveguide and times the echo created by a magnet that travels with the moving part. The approach is widely used for long strokes, such as tracking the position of a hydraulic cylinder.

Resolution and service life can be strong points for these sensors. The cost is typically higher than for simpler options, and tolerance for shock and vibration could vary by model, so the datasheet matters. For long travel, a longer-stroke LVDT may be an alternative worth putting beside it.

Optical And Laser Sensors: Non-Contact Sensing With A Clear Line Of Sight

Laser displacement sensors measure distance to a target using reflected light, so nothing touches the part being measured. That helps when contact could mark or disturb the part, such as a delicate surface or a moving web.

Light-based sensing depends on a clear path and a suitable target. Oil mist, vapor, dust or a shiny, dark or uneven surface could affect readings. An LVDT measures through a sealed housing, so those conditions matter less, although it does need a mechanical link to the moving part.

Capacitive And Eddy-Current Sensors: Small Gaps And Specialized Setups

Capacitive and eddy-current sensors detect how close a target is without touching it, and they are often chosen for small gaps and fast motion. Typical jobs include checking spindle runout and thin-film thickness.

Their measuring range is usually short, and the target’s material and surface condition could influence accuracy. They suit specialized setups more than general stroke measurement, where an LVDT or another stroke sensor tends to be easier to apply.

Where LVDT Measurement Fits Best

LVDTs tend to suit short and medium strokes where the sensor must survive shock, vibration, temperature changes or contamination while holding fine resolution for years. Test stands, actuators, valves and gauging fixtures are common homes for them.

Stellar Technology designs and builds LVDT displacement sensors in several families: precision gaging LVDT models for small dimensions, long-stroke LVDT designs for longer travel, miniature LVDT units for tight spaces and submersible LVDT sensors for wet environments.

When a standard design does not fit, the company’s engineers can modify a standard sensor or build a one-of-a-kind design around the mounting space, range or housing an application calls for. The Amherst, NY facility that builds them is ISO 9001:2015 and AS9100D certified, which describes its quality management system and does not by itself approve a specific model for a specific use.

Choosing The Right Method For Your Application

Start with the stroke and the smallest change you need to detect, because those two numbers rule out several options quickly. Then describe the environment honestly, since dirt, oil, moisture, washdown, shock and temperature range all reshape the shortlist.

Last, ask each manufacturer for the documented specifications of the exact series under consideration, including linearity, operating temperature and sealing. Side-by-side datasheets usually settle what a general comparison cannot.

FAQs

What can an LVDT measure?

An LVDT measures linear displacement, meaning how far a part has moved along a straight line from a reference point. Engineers use that reading directly for position, and indirectly for thickness, level, valve opening or vibration when those quantities can be turned into movement of the core. If your measurement can be described as motion along a line, an LVDT could potentially handle it.

Can you provide an example of an LVDT?

A gauging LVDT mounted in a fixture on a production line is a typical example: a spring-loaded probe touches the part, the core moves with it, and the output reports the part’s thickness. A long-stroke LVDT tracking the travel of an actuator is another. Browsing a manufacturer’s product families shows how stroke, diameter and housing change from one application to the next.

How can I measure displacement using an LVDT?

In concept, the coil body is fixed to a stationary frame, the core is linked to the moving part, and the coil output feeds a signal conditioner that produces a reading. That arrangement turns motion into an electrical signal a controller or display can track. Calibration against a known reference ties the signal to real distance, and the sensor’s documentation gives the exact excitation and wiring details for each model.

How much does an LVDT sensor cost?

Price depends on stroke length, accuracy, housing, sealing, electronics and quantity, so no single figure fits every sensor. A short-stroke sensor in a standard housing generally costs less than a long-stroke, sealed or custom design. The fastest route to a real number is a quote built on your range, environment and output requirements.

Bring your stroke, accuracy and operating conditions to Stellar Technology, the Application-Solution Source for LVDT displacement sensors built around your application.

Leave a Reply

Your email address will not be published. Required fields are marked *